Impregnating agent „IDEA HP”

Impregnating agent for natural, cast (artificial) stone, stone mass. Protects the surface from moisture, moss, frost, grease and UV rays, prevents mold formation and inhibits salt efflorescence. Facilitates surface maintenance: prevents liquids from penetrating, making it easy to remove stains of various origins (grease, wine, deposits). Suitable for indoor and outdoor conditions.

Features:

• Does not change the original color of the stone
• Does not form a film on the surface, allowing the stone to „breathe”
• The coated surface is non-glossy and non-slip

Application:

• Suitable for all natural and artificial stone surfaces, agglomerates, terrazzo, concrete slabs, unglazed bricks, clinker, as well as polished surfaces.
• Perfect for covering sculptures and monuments, protecting their surfaces from organic materials (moss, algae), moisture, and cold.

Instructions for use:

• The surface must be clean and dry. All stains must be removed, otherwise they will be difficult to remove after using the product.
• Shake the product and apply evenly to the surface. The product can be applied with a brush, roller, or sprayer (spray from a distance of 20-25 cm). It is best to use a brush, as it allows the impregnating agent to penetrate the surface well.
• Allow the product to dry naturally. Use a cloth moistened with IDEA HP to remove any excess product.

Special tips:

• For highly absorbent surfaces, it is recommended to repeat the procedure (even several times) two hours after the first application. It is important to completely saturate the stone with the impregnating agent.
• Walking on floors treated with this product is possible no earlier than 24 hours after application.
• Small pieces can be conveniently dipped into the impregnating agent.
• It is necessary to test the product on a small area of the surface before use.